Dyna Dist Overdrive
DRIVE – Wide range gain control lets you adjust the overdrive and/or distortion level from very light to an aggressive overdrive and high saturated harmonic distortion.
DYNA DIST – Mix control lets you adjust the amount of pure, smooth, tube-type overdrive (full dynamic overdrive setting) with a more aggressive, hard edged, harmonically rich fuzz distortion (full distortion setting) and all points in-between.Full DYNA position (counter-clockwise) lets more of the overdriven tone through, giving you a smooth, rounded dynamic, overdriven tube-like tone. Increasing the DIST level (rotating clockwise) increases the harmonic content for a thick, lush, harmonic filled distortion.
TONE – Passive, top end roll off control lets you clean up your tone when maxing out the gain (DRIVE) and harmonic response (DYNA DIST full DIST mode). At its max it has a wide band range so you don’t lose any of your original tone. Decreasing will create more darker tones without getting muffled.
LEVEL – Smooth, logarithmic control lets you adjust the final output level (active when the Pedal is “ON”).
Heavy Metal Dyna Dist Overdrive User’s Manual:
Download as a PDF document HERE
Cuts through the mix with classic and solid rock tone. From smooth tube like Overdrive to harmonically rich, evenly saturated Distortion. Maximum Gain 52dB
1/4″ Female Input jack DC Jack with “+” on RING 1/4″ Female Output jack
All Analog MAMP design for consistent performance. Selected quality components, for reliable use from recording studio to stage independent of the size of your amplifier.
100% true bypass heavy duty switch
Bright LED indicator
Strong, 1.6 mm, steel chassis
Heavy-duty control pots
External DC power jack
Designed assembled and tested in USA
Sound files recorded with a close located Audix mic, AC 30 – all tube amplifier, Fender Strat guitar
equipped with “Hot Rails” pickup @ Bridge position and Regular Single coil pickup @ Neck position.
Effect Controls locations Map:
1. LEVEL – @ Unity.
2. TONE – Max = Flat response
3. DYNA DIST
Max – for DIST Mode
9:00 o’clock – for Low Drive
3:00 o’clock – for High Drive
1. 100% True Bypass ON-OFF switching
2. Bright LED indicator
3. 1/4″ Input and Output female Jacks
4. 500K Ohm Input Impedance
5. Less than 10K Ohm Output Impedance
6. Max. Gain – “DRIVE”@ Max:
DYNA Mode (DYNA DIST @ MIN): >43 dB
DIST Mode (DYNA DIST @ MAX): >52 dB
7. Unity gain noise: < -110 dBu*
8. Max Input level: >-3 dBu
9. Max Output Signal: >+3 dBu
10. DC Power supply:
Battery or Regulated Adapter 9V +/- 1V
11. Current consumption @ 9V DC:
<4mA when “OFF” and <6mA when “ON”
*0 dBu = 0.775Vrmss
|Deep Blues DDO
Classic One DDO
Heavy Metal DDO
Twin Drive DDO
|Creates smooth and deep blues to rock tube style overdriven and distorted tones
Creates variations of superior rock tube style overdriven and distorted tones
Creates slamming heavy metal harmonic overdriven and distorted tones
Creates all possible high gain tones from warm crunch to heavy saturated distortion.