Large Coil Noise Canceling System
(LCNCS)



The LCNCS is an extremely low impedance air coil
assembly, designed to produce an appropriate noise
signal to be subtracted from the noise produced by
regular single coil pickups installed on a guitar.
The Large Coil is permanently placed in a tiny channel
machined around the pickups under the existing guitar pickguard. 
The single coil noise is effectively eliminated while the
natural single coil tone retains unaltered. The LCNCS is all passive circuitry and it doesn't require a battery.



Available Large coil colors: Black, Cream




LCNCS for permanent installation


LCNCS Models

Model Number Noise level Best matched Single coil pickup type Price
LCNCS STD 10 Alnico rod poles pickups, 6-8 KOhm resistance $250.00
LCNCS POW 15 Alnico rod poles 8-12 KOhm or Steel poles 6-10KOhm $260.00
LCNCS HOT 20 Steel screw poles P90 pickups, 7-9 KOhm resistance $270.00

  
Price, shipping and payment

Please, contact us for product availability and price/shipping/payment arrangements
  


In house installation

Ilitch Electronics offers routing the channel and full installation of the LCNCS in house. 

 You can ship either the entire guitar or the guitar body to us and we will return it back to you with the 
LCNCS installed. Please call us first for additional price details and shipping schedule arrangement.
   


Question: Do I need to install a LCNCS on my guitar?

 

Answer: If you play in a noisy environment, use large amount of amplification/gain or if you are doing recordings - then you may need a LCNCS installed on your guitar to eliminate the noise of the single coil pickups

 


Question: Who can install a LCNCS on a single coil pickups equipped guitar?

 

Answer: Any guitar building facility, or well equipped guitar repair shop would be able to perform a high quality installation of the LCNCS following the provided instructions
Also we will provide any technical support needed to make the LCNCS operate correctly

 


Description

The LCNCS is designed for noise cancellation of single coil pickups having resistance from about 5-6Kohm up to 12KOhm.

General requirements:

1. All single coil pickups need to be same magnetic polarity and same winding direction (NO RWRP)

2. The pickups switching does NOT have to include any "in series" pickups connection

Please, contact us and we will guide you step by step through the installation process.

Wiring, User's manual and installation instructions

Some typical wiring diagrams are available by the links below:
1.
LCNCS for pickups with braided output wires 
2. LCNCS User's manual and installation instructions - for two single coil pickup configuration
3.
LCNCS User's manual and installation instructions - for three single coil pickup configuration

 


Ilitch Electronics LLC
is a PayPal Verified Member.

You can go and check us at: https://www.paypal.com/us/verified/pal=sales%40ilitchelectronics.com


Ilitch Electronics LLC

Camarillo, CA, USA

Phone: 805 284 2775

Email: ilitch@ilitchelectronics.com


Official PayPal  Seal    http://www.facebookloginhut.com/facebook-login/


Quick Contacts:

ilitch@ilitchelectronics.com

sales@ilitchelectronics.com

service@ilitchelectronics.com

 

  
© Ilitch Electronics LLC, 2011