Cuts through the mix with classic and solid rock tone. From smooth tube like Overdrive to harmonically rich, evenly saturated Distortion. Maximum Gain 52dB
1/4″ Female Input jack DC Jack with “+” on RING 1/4″ Female Output jack
All Analog MAMP design for consistent performance. Selected quality components, for reliable use from recording studio to stage independent of the size of your amplifier.  

Features:
100% true bypass heavy duty switch
Bright LED indicator
Strong, 1.6 mm, steel chassis
Heavy-duty control pots
External DC power jack

Designed assembled and tested in USA

All sound files were recorded by Delfin Francois (France)
Set up: Guitar Gibson SG, Bridge pickup, close located mic, Suhr Badger – all tube amplifier        

Effect Controls locations Map:

CH1 settings
1. LEVEL – @ Unity
2. TONE – 12:00 o’clock
3. DYNA DIST
9:00 o’clock for DYNA Mode;
3:00 o’clock - for DIST Mode
4. DRIVE
9:00 o’clock – for Low Drive
3:00 o’clock – for High Drive

CH 2 settings:
1. VOLUME – @ Unity
2. FILTER – 3:00 o’clock
3. GAIN
12:00 o’clock – Moderate Gain
3:00 o’clock – Heavy Gain

1. 100% True Bypass Heavy Duty switching.
2. Bright LED indicators
3. 1/4″ Input and Output female Jacks
4. Input Impedance – 500Kohm CH1; 1Meg CH2
5. Output Impedance – Less than 10Kohm 
6. Max. Gain CH1 – DRIVE, TONE, LEVEL @ Max
DYNA Mode (DYNA DIST @ MIN): >48 dB
DIST Mode (DYNA DIST @ MAX): >58 dB
7. Max. Gain CH2: >15dB
(GAIN, FILTER and VOLUME @ Max)
8. Unity gain Noise: < -110 dBu*
9. Max Input level: > -3 dBu
10. Max Output Signal: > +3 dBu
11. DC Power supply: Battery or Regulated Adapter
(+ on Ring;  – on Center) 9V +/-1V
12. Current consumption @ 9V DC
Less than 8mA when “OFF”
Less than 9mA when “ON”

* 0 dBu = 775 mVrms