LCNCS in hallow body


19 in stock

This LCNCS modifications are for permanent installation inside of a hallow or semi-hallow body guitar with 1, 2 or 3 single coil pickups
Regular has 21.5″ / 546 mm in circumference; LCNCS Compact has 19.75″ / 502 mm in circumference
Contact us first if you want to build a LCNCS for any special single coil pickups or specific guitar shape


ILITCH LCNCS for solid body guitars
Enjoy your play and tone without the hum


1. Base your selection on your pickups brand and model spec the alnico rod magnets type and the DC resistance in KΩ.
2. You can measure the DC resistance of the pickups (using a digital multimeter at 20 KΩ range or automatic) in the following way:
= Plug in a normal guitar cable into the guitar output jack
= Put Volume Tone pots at their Max position
= Go to position 1 – Bridge pickup only
= Measure the DC resistance between Sleeve and Tip at the other side of the guitar cable jack
= Do same for the other pickups and write down the readings

Then you select the LCNCS STRENGTH you need
VNT – Strength 8 – for Alnico polepiece pickups 5-6.5 KΩ resistance
STD – Strength 10 – for Alnico polepiece pickups 6-8 KΩ resistance
POW – Strength 15 – for Steel screw poles pickups (NOT P90!) 7-9 KΩ resistance
HOT – Strength 20 – for Steel screw poles pickups P90 7-9 KΩ resistance
HOT PLUS – Strength 30 – for Charlie Christian pickups 3-4KΩ resistance


Audio MP3 files recorded with a close located Audix mic, AC 30 – all tube amplifier and LP Goldtop Guitar equipped with IP90 pickup on Bridge position and IP90 on Neck position


Additional information


VNT Alnico rod poles pickups, 5.5-6.5 KOhm, STD Alnico rod poles pickups, 6.0-8.0 KOhm, POW Alnico rod poles 9-15 KOhm/Steel poles 7-8 KOhm, HOT Steel screw poles P90 pickups, 7-9 KOhm, HOT PLUS Charlie Christian pickups about 3.0KOhm


Regular 21.5" / 546mm, Compact 19.75" / 502mm


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.