LCNCS in large cavity


19 in stock

This LCNCS modifications are for permanent installation in the back control cavity of guitar with 1, 2 or 3 single coil pickups
LCNCS Compact1 is about 19.0″ / 482mm; LCNCS Compac2 is about 18.0″ / 457mm in circumference
Contact us first if you want to build a LCNCS for any special single coil pickups or control cavity circumference


ILITCH LCNCS for large back control cavity guitars
Enjoy your play and tone without the hum

1. Find out from the pickups brand and model spec the alnico rod magnets type and the DC resistance in KΩ.
2. You can measure the DC resistance of the pickups (using a digital multimeter at 20 KΩ range or automatic) in the following way:
= Plug in a normal guitar cable into the guitar output jack
= Put Volume Tone pots at their Max position
= Go to position 1 – Bridge pickup only
= Measure the DC resistance between Sleeve and Tip at the other side of the guitar cable Jack
= Do same for the other pickups and write down the readings

Then you select the CVNCS R2 STRENGTH you need
STD – Strength 10 – for Alnico polepiece pickups 6-8 KΩ resistance
POW – Strength 15 – for Alnico polepiece pickups 8-12 KΩ resistance/Steel screw poles pickups (NOT P90!) 7-9 KΩ resistance
HOT – Strength 20 – for Steel screw poles pickups P90 7-9 KΩ resistance


Audio MP3 files recorded with a close located Audix mic, AC 30 – all tube amplifier and LP Goldtop Guitar equipped with IP90 pickup on Bridge position and IP90 on Neck position


Additional information


VNT Alnico rod poles pickups, 5.5-6.5 KOhm, STD Alnico rod poles pickups, 6.0-8.0 KOhm, POW Alnico rod poles 9-15 KOhm/Steel poles 7-8 KOhm, HOT Steel screw poles P90 pickups, 7-9 KOhm, HOT PLUS Charlie Christian pickups about 3.0KOhm


Compact1 19" / 482mm, Compact2 18" / 457mm


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.