PGNCS Jazz Bass


3 in stock

Low impedance air coil built in the Jazz Bass pickguard keeps the true single coil pickup tone of your JB without the hum. American Fender Jazz Bass guitars with 1, 2 or 3 JB style single coil pickups can be retrofitted with PGNCS JB
Contact us first if you want to build a PGNCS JB on your own JB pickguard


ILITCH Pickguard hum canceling system for Fender Jazz Bass
Enjoy your play and tone without the hum

1. Find out from the pickups brand and model spec the alnico rod magnets type and the DC resistance in KΩ.
2. You can measure the DC resistance of the pickups (using a digital multimeter at 20 KΩ range or automatic) in the following way:
= Plug in a normal guitar cable into the guitar output jack
= Put Volume Tone pots at their Max position
= Go to position 1 – Bridge pickup only
= Measure the DC resistance between Sleeve and Tip at the other side of the guitar cable Jack
= Do same for the other pickups and write down the readings

Then you select the PGNCS JB STRENGTH you need
VNT – Strength 8 – for Alnico polepiece pickups 5-6.5 KΩ resistance
STD – Strength 10 – for Alnico polepiece pickups 6-8 KΩ resistance


Audio MP3 files recorded with a close located Audix mic, AC 30 – all tube amplifier and Fender Stratocaster guitar equipped with three Strat style single coil pickups. Pickup recorded – Bridge only


Additional information


VNT – for Alnico polepiece pickups 5-7 KOhm resistance, STD – for Alnico polepiece pickups 7-9 KOhm resistance, POW – for Alnico polepiece pickups 10-12KOhm / Steel polepiece pickups 6-8 KOhm resistance


4 strings jazz bass, 5 strings jazz bass


W/B/W 3-Ply with outline bevel, B/W/B 3-Ply with outline bevel, P/B/P 3-Ply with outline bevel


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.